K Power Solutions

 Indoor Safety- Periodically test the electrical installation for insualtion strength and replace if required. Replace damaged electrical components like switches, plug sockets etc., immediately when noticed. Use only ISI marked electrical appliances, cables and wires. Use 30 mA ELCB the "LIFE SAVER" at the main supply point. Get electrical work done only by qualified licensed electrical contractors. Install switches and plug sockets at an inaccessible height and away from children. Do not use electrical appliances that have been wet. Make sure that there is easy access to switch off the supply source quickly in case of an emergency.  Do not fix a nail on the wall where concealed PVC conduit wiring has been done.  Outdoor safety- Avoid fallen electricity poles and power lines or anything in contact with these. Do not touch water or anything in contact with water near where there is a downed power line. Do not try to free somebody who is in contact with an electrical power...

Why Power Correction is required? All modern electronic devices are vulnerable to the poor power quality. What can you do about it? There are power Correction Devices are available that accept electrical power in whatever form it is available and modify the power to improve the quality or reliability required for electronic AC equipment. The power handling and performance requirements vary depending upon each application. A wide range of power correction products are available that utilizes a range of technologies and provide different degrees of protection to the connected load. 1- Isolation Transformers reduces the problem of common mode noise induced through multi current path in ground circuit or Loop. 2- Noise Filter reduce conducted electromagnetic interference (EMI) and radio-frequency interference (RFI).  Filter requires careful application if not used properly it may cause ringing effect 3-  Harmonic current Control  there are many methods available to control ...